Installing a factory smoke exhaust system is extremely necessary. Because smoke is a dangerous element to human health. The factory is a place where thousands of workers gather and there is a high risk of fire. For better understanding, in this article P69 Mechanical Factory will clearly share why factories should install smoke extraction systems.
Contents
What is a factory smoke extraction system?
The smoke extraction system for factories and factories is a smart solution to bring ventilation, comfort, and coolness. In order to bring production efficiency and prevent environmental pollution.
Features of the factory smoke exhaust pipe
The factory chimney has the following characteristics:
1. About the size
Depending on the length of the suction cup, the capacity of the exhaust fan motor, there is a corresponding pipe box size.
The shape of the conduit is usually a square box, but in installations with difficult paths and many obstacles, it can be edited into a rectangular shape.
For smoke pipes in the same system, it is necessary to have the same size with each other, to limit the difference in design.
2. About installation characteristics
– Smoke pipes are manufactured in lengths from 1000 – 1200mm
– The pipes will be connected to each other and screwed, firmly glued with silicone.
– When that road is difficult, it is possible to bend the pipe, tilt it as required.
Why should you install a factory or industrial smoke extraction system?
In factories, manufacturing plants, and industrial zones, machines are often produced and operated with constant intensity. High frequency will create smelly smoke, heat creates a stuffy space. Affect vision, work productivity…
Therefore, the construction and installation of industrial smoke extraction systems. Exhaust factory smoke. Factory smoke extraction is essential to create a clean environment to increase working efficiency and production productivity.
The installation of an industrial smoke extraction system will help the entire factory space. The factory limits smoke and dust, ensuring the safety of infrastructure, people and property in general. In addition, it will improve the living environment and limit diseases.
Please see more Why are round ducts installed in factories today?
Important factors when using and installing smoke pipes
One of the important points to note is when installing smoke pipes for factories, factories and industrial parks. It is necessary to limit the path to be bent too much. Because through each bend, the pipeline will reduce the speed of the wind; suction power of an industrial smoke extraction system.
Standards and regulations on factory smoke exhaust systems
In order for the chimney to maximize its use, it is necessary to comply with the following standards:
1. Regulations on Smoke Exhaust Fan Motor
Smoke exhaust fan motor. The exhaust fan is a necessary and important part in the factory smoke exhaust system. And in order for the smoke extraction system to operate effectively and with high productivity during the selection, purchase and installation process, you should choose to buy the right type of ventilation fan motor according to the specified standards.
Please see more Why brick factories should install air grills
2. Installing industrial smoke extraction motor location
Based on the workshop space to choose for themselves the appropriate ventilation system and on that basis choose the most appropriate ventilation fan. When installing the Smoke Exhaust Motor, you need to pay attention to installing the device in the correct position in the center to limit noise during operation. At the same time, install a fan to avoid contact with the air to limit the impact on the quality and life of the product.
3. Regulation on wind speed
The standard smoke extraction system must meet the wind speed of 8.5m/s. The standard of air intake speed as above is to ensure the safest and most effective suction of odors and dust from the factory.
4. Regulations on smoke extraction pipelines
The smoke exhaust system, also known as the factory smokestack, also plays an important role, the choice of materials to make the system as well as the design and installation structure is an issue you should pay attention to during the construction process labor.
5. Smoke extraction pipelines need to have clear design regulations
Normally, standard products are usually made from high-quality materials with zinc coating and are installed at a certain location according to the specified standards on thickness and installation distance.
The smoke pipe has the function of sucking smoke in the factory to the outside environment and providing more oxygen to your kitchen space. Therefore, smoke pipes must be installed in well-ventilated places, at appropriate distances and away from power lines and explosive materials.
6. Regulation on lighting standards
During the installation of the factory smoke extraction system. This part of the device will cover the light of the projector lamp and affect the production process. Therefore, during the construction and installation of the smoke extraction system in the kitchen. You should consider adding a lighting system in the hood to ensure the best operation.
And when choosing a light bulb, you should choose to buy a product that is heat-resistant, high-steam-resistant and has a good level of light to ensure the durability of the bulb when in operation.
Above are some regulations on the ventilation and exhaust ventilation system of the factory that P69 Mechanical Factory shares with you. If you have any questions or need further assistance, please contact us at the following address:
Contact information P69 Mechanical Factory
Address: Km 18, Thang Long Boulevard, Thach That Quoc Oai Industrial Area, Hanoi
Headquarters: No. 06/165C, Xuan Thuy, Cau Giay, Hanoi
Telephone: 09666 86 969
Hotline: 0989 188 982
Email: kd1@cokhip69.com.vn
LinkedIn: https://www.linkedin.com/in/nhamaycokhip69/
Website: https://cokhip69.com.vn/
Youtube: https://www.youtube.com/channel/UCfvFIhhuJ4ANAO0glUPSTAg/ab
