0966686969
Y-shaped Round Duct also known by many other names such as Y fork, Y pipe, or Y-shaped T-part. They are considered a type of accessory that appears quite a lot in the circular wind pipe system. Let’s learn more about the product with P69 Mechanical Factory
Product Information
PKOGT-RNCY
Material:
- Galvanized Steel or Stainless steel
- Use GI galvanized sheet with JIS G3302 standard
Thickness:
- Common thickness: 0.48, 0.58, 0.75, 0.95, 1.15 mm
- Galvanized thickness: from Z8 (80 grams of zinc/m2) to Z18
- Stainless steel thickness: from 0,5 ÷ 1,15mm
Product design features
– With a Y-shaped design similar to the letters in the Vietnamese table; with two branches
– Design materials: Galvanized steel or stainless steel with the thickness depending on the size of the product
– Product sizes are extremely diverse depending on the attached connected air duct system
– They are divided into 3 parts and then connected together; through tight spot welds.
Product Roles
– As an accessory product to divide large pipes, separate large wind pipes into 2 branches with different directions and directions
– In which, the D degree of the branch line is usually equal or equal in size to the main body
– Purpose: Create more ductwork system, circulate air flow to various locations in the factory; according to the direction and needs of the original use
P69 Mechanical Factory Contact information
Address: Km 18, Thang Long Boulevard, Thach That Quoc Oai Industrial Area, Hanoi
Headquarters: No. 06/165C, Xuan Thuy, Cau Giay, Hanoi
Telephone: 09666 86 969
Hotline: 0989 188 982
Email: kd1@cokhip69.com.vn
Website: https://cokhip69.com.vn/
Thu Bùi –
sản phẩm bền đẹp